Matt’s Ibanez S670QM Fret Leveling & Guitar Setup

Matt recently acquired a stunning Ibanez S670QM guitar.

First I looked over the entire guitar, keeping an eye out for anything that looked strange or in need of care. The guitar is a beauty and in perfect condition. I was particularly struck by the brushed steel look of the tuners on the headstock, which give it a ruggedness on top of its perfectly-curated blue tiger stained look.

Ibanez S670QM headstock
Check out the dark brushed chrome on this headstock! (stock photo)

The only visual thing I noticed out of the gate was that the fretboard was very dry. This was solved by oiling it up with MusicNomad F-One Oil.

dry guitar neck with F-One Oil bottle in front
Good ol’ F-One Oil worked wonders on Matt’s dry guitar neck!

Ibanez S670QM guitar

All the electronics work great.

The only issue was a buzzing on the first fret for both the high E and B strings. Using my FretGuru fret rocker, we discovered many variances in height on different frets.

stock photo of FretGuru fret rocker

There are a couple of things that can cause this high fret issue:

  1. They weren’t rounded correctly at the factory. The solution to this is either spot-leveling the specific fret or a complete fretboard leveling.
  2. Frets sticking out (e.g. the frets popped up out of the wood). The solution to this is to gently use a hammer or clamp + glue to seat them back into the wood fretboard.

Upon inspection it became clear that the issue was a high fret, and my preferred solution for this ailment is spot-leveling. The downside of spot-leveling is that sometimes this can lead you to “chase high frets” down the fretboard, however, if this happens, the fallback is still a complete fretboard leveling, so there’s really no harm in trying.

Using my StewMac fret end dressing file, I cycled through a few rounds of the following:

  1. Draw a line on the problem area of the fret with a permanent marker.
  2. File it down until the marker disappeared.
  3. Test out the fret rocker
stock photo of StewMac’s fret end dressing file

Once the fret buzz was taken care of, I proceeded to set up the guitar. This sapphire blue beast was created to shred, and therefore we leaned into the low action that Ibanez’s are known for.

The end result of our efforts was a perfect guitar for rocking out and being seen. Congrats, Matt!

stock photo of Ibanez S670QM